pan tilt camera

[drx]

I had to replace the pan tilt assembly on the raspberry pi robot after an unfortunate incident involving driving off a table... However I am having problems with the new assembly, it seems to be centred very far to the right. I presume I ve made a mistake in the assembly but not sure what... Any advice appreciated!

[Alan]

Hi there,

If you haven't already, you may need to unscrew the white servo horn (circular bit of plastic) from the servo and move it to the left a bit. With the servo powered off, you should be able to turn it just over 90 degrees to the left, and just over 90 degrees to the right.

Hope that helps.

Regards

Alan