Custom Firmware, Electronics Design, and PCB Layout

Stepper Motor Maximum Speed and Power Calculator

See our other Electronics Calculators.

Stepper motors are normally used for positioning, and are not known for their speed.  This calculator computes the maximum speed of a stepper motor, which is limited by the time it takes for the coil to energize to it's maximum holding current, and then de-engergize as polarity flips. 

Equations:

Current through the coil is proportional to the time that the voltage has been applied, and inversly proportional to the inductance. 

I= V*T/L

T= I*L/V

For one step the current must go from 0 to Imax and back to 0, or alternatively from -Imax to +Imax. 

I= 2*Imax

T= L*Imax*2/V

T is the number of seconds for a single step.

To compute maximum revolutions per second - divide seconds per step by steps per revolution.

Rev/sec = V/(L*2*Imax)/(steps/rev)

Pmax= 2*Imax*V

Pmax occurs not when the motor is going max speed because the current is a triangle wave.  Pmax occurs when the slope of the current is small compared to the on holding time of the step pulse.

Manufacturer Links

The best way to find electronic parts is to use our free Electronics Component Directory, where a myriad of electronics manufactures are listed.

Other Electronics Links

We offer a broad range of electrical engineering calculators and electronics articles and tutorials. 

Daycounter specializes in contract electronics design.  Do you need some help on your project?  Contact us to get a quote.

Disclaimer:  Daycounter, Inc. doesn't guarantee the result or accuracy of this free calculator. 

[Employment] [Downloads] [Articles] [Contact Us]

Salt Lake City, UT, USA

Disclaimer: Daycounter, Inc. doesn't guarantee the accuracy of any of it's content. Use at your own risk.

© Copyright 2016 Daycounter, Inc. All rights Reserved.