M5 Screws
M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and o...
View full details
M5 button-head screws of various lengths are used throughout FarmBot to attach plates and 3D printed parts to extrusions, V-wheels to plates, and o...
View full detailsM3 screws are used throughout FarmBot for mounting motors and other small electronic components on the tools. Diameter: 3mm (M3 size) Lengths: 6mm...
View full detailsCombined with screws, these drop-in style tee nuts allow components such as plates and 3D printed parts to be attached quickly and securely anywher...
View full detailsWhen rotated, eccentric spacers accurately position V-wheels on a plate such that they can firmly engage V-slot aluminum extrusions. They are only ...
View full detailsThese spacers are used to offset V-wheels from plates so that they may engage extrusions. Sold in packs of 30. Material: Aluminum ...
View full detailsThese M5 precision shims are placed in between the two bearings in every V-wheel. They keep the bearings from squishing into each other and binding...
View full detailsM5 locknuts are used throughout FarmBot to secure M5 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vib...
View full detailsThese stainless steel loop clamps are used to secure the camera to the z-axis. (Used in the v1.2 FarmBots) Trade Name: Loop Clamp ...
View full detailsStandoffs are used to offset the electronics boards from the electronics mounting plate. We offer both 6mm and 16mm length. Both lengths are sold i...
View full detailsM3 locknuts are used throughout FarmBot to secure M3 screws in place. The nylon insert allows the locknut to resist loosening when subjected to vib...
View full detailsThese washers are used throughout FarmBot in combination with M5 screws and M5 locknuts. They allow nuts to be tightened on plastic components and ...
View full detailsThese pins are used to help align track extrusions and the gantry main beams. Sold in packs of 6 (for Genesis sized devices) and packs of 20 (for G...
View full detailsThese screws are used to mount the electronics boards to the electronics mounting plate with the M2.5 standoffs as an intermediary component. Sold ...
View full detailsThese are used to attach the track end plates and track joining plates to supporting infrastructure such as a raised. Sold in packs of 35. Materi...
View full detailsCopyright © 2019 FarmBot.