OSH Park
Profile for Airic-Lenz
Shared projects
FPV Video and Audio PCB / PDB
by
Airic-Lenz.
2
layer board of
1.48x0.91
inches
(37.62x23.11
mm).
Shared on
August 12th, 2015 12:27.
A little PCB to connect a camera and a video TX with an optional microphone to be used on FPV-model-planes or copters. The PDB includes power filtering for a clean supply to the video TX as well as to the camera.
The supply voltage to the camera and the video transmitter can be 5V or equal to the input voltage (selectable via solder jumpers). The audio signal can be taken from the optional microphone module or from the camera (selectable via solder jumper).
BOM:
- L101 - 100uH 0.62A (WE-PD SMD 7332)
- C101 - 0.1uF (SMD 0603)
- C102, C103 - min 100uF, min 20V (electrolytic cap SMD 8x10.5mm)
- U101 - 1117 5V regulator (SOT-223)
- M101 - SparkFun microphone module BOB-09964
FPV Video PCB / PDB
by
Airic-Lenz.
2
layer board of
1.19x0.91
inches
(30.12x23.11
mm).
Shared on
August 8th, 2015 15:29.
A little PCB designed to provide a neat FPV PDB. The PDB includes power filtering for a clean supply to the video TX as well as to the camera.
BOM:
- L101 - 100uH 0.62A (WE-PD SMD 7332)
- C101 - 0.1uF (SMD 0603)
- C102, C103 - min 100uF, min 20V (electrolytic cap SMD 8x10mm)
- U101 - 1117 5V regulator (SOT-223)
CopterAlarm v1.1
by
Airic-Lenz.
2
layer board of
1.47x0.61
inches
(37.31x15.60
mm).
Shared on
June 19th, 2015 21:53.
An audible alarm that goes off when the RX send no signal any longer (on disconnect or failsafe). Connects to the batteries balancing port.
Signal Inverter (e.g. for S.Bus)
by
Airic-Lenz.
2
layer board of
0.95x0.73
inches
(24.10x18.62
mm).
Shared on
March 9th, 2015 15:11.
Signal Inverter (panelized, 3 boards) to be used for example for S.Bus to Naze32 or any other logical signal that needs to be inverted.
BOM
- 2x 1kΩ resistor [0603]
- 1x NPN transistor [SOT23] e.g. N2222A
Nunchuck Connector Breakout
by
Airic-Lenz.
2
layer board of
0.60x0.71
inches
(15.32x18.11
mm).
Shared on
March 5th, 2015 16:30.
Nunchuck Connector Breakout