OSH Park
Profile for MTN
Shared projects
17mm MTN-MAXlp v1.01 - BLF Edition
by
MTN.
2
layer board of
0.68x0.68
inches
(17.15x17.15
mm).
Shared on
April 5th, 2015 20:01.
Description to be updated. For now, please see this thread on BLF: http://budgetlightforum.com/node/38687
MTN-10DD
by
MTN.
2
layer board of
0.41x0.41
inches
(10.31x10.31
mm).
Shared on
March 18th, 2015 06:13.
Single-Sided LFPAK33 10mm FET Driver
- MCU: attiny13a-MMU
- C1: 0603 - 10uF - X7R
- OTC: 0603 - 1uF - X7R (for off-time FW)
- R1: 0603 - 19.1K - 1%
- R2: 0603 - 4.7K - 1%
- Diode: SOD-323
- FET: LFPAK33
This driver can run all of the normal attiny13a firmware and has all of the performance of the bigger FET drivers.
Now you can have your cake and eat it too: use the same firmware and features that the big drivers use; have super-low resistance; and have a single-sided board for more battery clearance and less chance of shorting.
MTN-12DD
by
MTN.
2
layer board of
0.48x0.48
inches
(12.22x12.22
mm).
Shared on
March 18th, 2015 06:12.
Single-Sided LFPAK33 12mm FET Driver
A bigger version of its little brother, the MTN-10DD. This PCB can be sanded or ground down to 10mm if needed.
- MCU: attiny13a-MMU
- C1: 0603 - 10uF - X7R
- OTC: 0603 - 1uF - X7R (for off-time FW)
- R1: 0603 - 19.1K - 1%
- R2: 0603 - 4.7K - 1%
- Diode: SOD-323
- FET: LFPAK33
This driver can run all of the normal attiny13a firmware and has all of the performance of the bigger FET drivers.
Now you can have your cake and eat it too: use the same firmware and features that the big drivers use; have super-low resistance; and have a single-sided board for more battery clearance and less chance of shorting.
TK Seis-Um | BLF Edition
by
MTN.
2
layer board of
1.69x1.69
inches
(42.88x42.88
mm).
Shared on
February 13th, 2015 02:53.
A replacement TK61 driver, shared with the BLF community.
- For more information, see the thread at http://budgetlightforum.com/node/37685
ATTiny13a MMU Breakout Board
by
MTN.
2
layer board of
0.66x0.45
inches
(16.81x11.53
mm).
Shared on
January 15th, 2015 02:30.
- 10-QFN/MLF
- Labeled with USBASP pins for easy (less confusing!) hookup
- Pin spacing and size works with standard header pins
- Should be useful for downsizing drivers while using existing firmwares