OSH Park
Profile for tupoar
Shared projects
RCD 'T-Box' v1.2 rev 3 - (RX5808 Pro Diversity OLED)
by
tupoar.
2
layer board of
3.84x2.15
inches
(97.51x54.51
mm).
Shared on
March 31st, 2016 11:57.
Version 1.2 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.
Changelog:
Rev 3:
- Added pads for alternative OLED screen
Rev 2:
- Fixed missing track on RSSI_A
Rev 1:
- Added IR Emitter
- Added SPI port
Details can be found on
RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752
and Github:
https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md
https://github.com/RCDaddy/T-Box
RCD 'T-Box' v1.1 rev 2 - (RX5808 Pro Diversity OLED)
by
tupoar.
2
layer board of
3.84x2.15
inches
(97.51x54.51
mm).
Shared on
November 21st, 2015 21:33.
Version 1.1 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.
Changelog:
Rev 2: Fixed missing track between RSSI_A and PIN 25
Rev 1: Initial version. Replaced Pro Mini with Atmega328p.
Details can be found on
RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752
and Github:
https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md
https://github.com/RCDaddy/T-Box
RCD 'T-Box' v1.0 rev 4 - (RX5808 Pro Diversity OLED)
by
tupoar.
2
layer board of
3.84x2.15
inches
(97.51x54.51
mm).
Shared on
October 8th, 2015 17:38.
Revision 4 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.
Changelog:
Rev 4:
Added 5v regulator to the rear of the board. Requires ‘DSN-MINI-360’ adjustable step down regulator.
More Pro Mini pin corrections
Rev 3.1:
Minor adjustments to routing
Minor changes to 100k pull down resistors.
Rev 3:
Fixed hole spacing for Pro Mini
Fixed DTR, TX, RX etc ports as they were reversed
Swapped Up and Down Buttons.
Added 100K pull down resistors on RSSI lines
Added extra ground and vcc points for pro mini
Corrected A5 and A4 conenctions
Rev 2:
- Repositioned via holes
Rev 1:
- Initial version
Details can be found on
RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752
and Github: https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md https://github.com/RCDaddy/T-Box
RCD 'T-Box' v1.0 rev 4 - (RX5808 Pro Diversity OLED)
by
tupoar.
2
layer board of
3.84x2.15
inches
(97.51x54.51
mm).
Shared on
October 7th, 2015 21:52.
Revision 4 of my non-SMD pcb designed for use with rx5808-pro-diversity project started by Crazyshea.
Changelog:
Rev 4:
- Added 5v regulator to the rear of the board. Requires ‘DSN-MINI-360’ adjustable step down regulator.
Rev 3.1:
Minor adjustments to routing
Minor changes to 100k pull down resistors.
Rev 3:
Fixed hole spacing for Pro Mini
Fixed DTR, TX, RX etc ports as they were reversed
Swapped Up and Down Buttons.
Added 100K pull down resistors on RSSI lines
Added extra ground and vcc points for pro mini
Corrected A5 and A4 conenctions
Rev 2:
- Repositioned via holes
Rev 1:
- Initial version
Details can be found on
RCGroups: http://www.rcgroups.com/forums/showthread.php?t=2477752
and Github: https://github.com/sheaivey/rx5808-pro-diversity/blob/master/docs/oled-arduino-nano.md
Airwave RX
by
tupoar.
2
layer board of
1.10x2.60
inches
(27.94x66.04
mm).
Shared on
November 20th, 2014 09:08.
This is not my work!