TeensyFlightController.v06

by PeskyProducts.

4 layer board of 1.20x0.78 inches (30.58x19.91 mm).
Shared on January 20th, 2016 09:27.

Added TPS61240 5V booster and 5 V rail for rc radio, NCP161 3V3 LDO, and connected EM7180 interrupt to K20.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

HC-05 To Arduino FTDI Adapter-01

by wholder.

2 layer board of 0.60x0.60 inches (15.27x15.27 mm).
Shared on January 20th, 2016 03:41.

For more details on this PCB design, see my article at:

https://sites.google.com/site/wayneholder/inexpensively-program-your-arduino-via-bluetooth

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

Dragonfly.v01

by PeskyProducts.

4 layer board of 0.71x1.41 inches (17.93x35.71 mm).
Shared on January 20th, 2016 02:55.

STM32L4 microcontroller programmable using Arduino IDE.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

Micro.Modem.rev_a1

by WarHawk-AVG.

2 layer board of 1.04x0.95 inches (26.34x24.13 mm).
Shared on January 20th, 2016 01:07.

Micro.Modem.rev_a1

2 layer board of 1.04x0.95 inches (26x24mm). $4.90 for three.

Atmega328p-based 1200 Baud AFSK radio modem

For use with MicroAPRS and other amateur radio packet radio protocols

MicroModem MicroModem is an open-source implementation of a 1200-baud AFSK / Bell 202 modem on the popular ATmega328p microprocessor. MicroModem can be used for things like ham radio APRS, AX.25, TCP/IP over SLIP, experimentation with mesh-networks, long-range wireless communication with sensors (Or friends! Or strangers!). It basically comes in two flavors: Prebuilt or DIY.

It is simple enough that, if you have some basic electronics experience, you can understand and build it yourself with a few components and an Arduino. You can also get a more advanced and prebuilt, fully tested MicroModem directly from original designer. He manufacture them personally, to the highest quality. (link/store at his site)

Please note that the resources listed here for building your own MicroModem are for an earlier, more simple version, than the one he currently offers for sale. While the two modems are functionally identical, the version he offers for sale has some technical refinements, and is implemented as an integrated board with MCU, USB and everything on one board, measuring only 3×5 cm. The DIY version is a board with all the external circuitry needed for turning a standard Arduino (or compatible like Microduino) into a MicroModem!

DIY MicroModem

Per original designers request…link to the Rev 1 Documentation for the project

Unit above is the MicroModem, the Microduino-Core/Microduino-Core+ module and the Microduino USB TTL module stacked There is also a combined Microduino Core USB that is an all in one unit

https://www.youtube.com/embed/L-LeizF6ixY

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

PTE45_PTF45_2x3_Breakouts_0_0_1

by RabidElephant.

2 layer board of 0.73x3.02 inches (18.42x76.71 mm).
Shared on January 19th, 2016 17:29.

2nd go.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project