OSH Park
Shared projects
IR Sync Pulse Emitter
by
jramshur.
2
layer board of
3.79x2.61
inches
(96.27x66.27
mm).
Shared on
September 15th, 2015 16:39.
Accepts a TTL pulse and outputs a high intensity IR pulse of the same duration. Used for isolating two systems at several inches away.
RileyLink 0.7
by
ps2.
2
layer board of
2.09x1.18
inches
(53.01x30.02
mm).
Shared on
September 15th, 2015 14:56.
RileyLink 0.7
Sensor Board RevF
by
2
layer board of
4.26x1.41
inches
(108.23x35.84
mm).
Shared on
September 15th, 2015 14:41.
Sensor Board RevF
123LED1B
by
tubular.
2
layer board of
0.75x2.00
inches
(19.08x50.83
mm).
Shared on
September 15th, 2015 11:04.
123LED1B
Dick Butt Mods Naos Raptor PCB Ver. 3
by
Pooleo.
2
layer board of
3.63x1.68
inches
(92.30x42.72
mm).
Shared on
September 14th, 2015 23:21.
An open source PCB for GE’s NSR020A0X43Z NAOS Raptor 20 amp fitted for a Hammond 1590g enclosure. Initial testing of the early design completed. Tweaks have been made to correct the fuse footprints and voltmeter inputs to better accommodate an .28 inch meter. Be sure to use a little kapton tape over via holes beside negative side battery clip or you will have arcing and a risk for mod failure. Thank you Facebook modding community. Parts list: http://www.digikey.com/short/7rt277 https://oshpark.com/shared_projects/oEGEt8uA