Subaru BRZ Fan control

2 layer board of 1.58x1.58 inches (40.03x40.03 mm).
Shared on July 28th, 2015 12:14.

Simple on/off fan driver

Order board. Download. Permalink. Embed order link.

Solo 3DR Bus Accessory Connector Breakout

2 layer board of 1.03x1.60 inches (26.06x40.67 mm).
Shared on July 28th, 2015 04:21.

Breakout board for the accessory connector on the bottom of the 3DR Solo

Order board. Download. Permalink. Embed order link.

Active-RPi-3xHub75-Adapter

2 layer board of 3.27x1.40 inches (83.11x35.61 mm).
Shared on July 28th, 2015 04:01.

Raspberry Pi RGB Matrix Adapter for the Raspberry Pi RGB Matrix project on github

Order board. Download. Permalink. Embed order link.

PiDac V3.0 PCM5122

2 layer board of 2.56x2.23 inches (65.02x56.52 mm).
Shared on July 27th, 2015 16:06.

Pi Hat board - PCM5122/5102

Non-Commercial Use Only

This board is designed for a Raspberry Pi B+ or B2 (40 pin connector). It will accept a 5122 or a 5102. If a 5122 is used, it is controlled by I2C. If 5102, there are no controls. Both have been proven to work on this board. D1,C1,J1 are optional components if this is powered from an external source instead of the Pi. BOM is at DigiKey: BOM ID: 2787508 BOM Name: PI_DAC V3

To function on the Pi, the board acts like an IQaudIO DAC+ when populated with the PCM5122 or HiFiBerry DAC when populated with the PCM5102

Keith

Order board. Download. Permalink. Embed order link.

Micro Attiny Node V1.0

2 layer board of 0.75x0.75 inches (19.02x19.02 mm).
Shared on July 27th, 2015 09:43.

PCB (19x19mm) for tiny sensor node with transceiver RFM12B.

Project Details

Order board. Download. Permalink. Embed order link.