OSH Park
Shared projects
- You need to sign in or sign up before continuing.
ESP8266TeensyAdd-On.v01
by
PeskyProducts.
2
layer board of
0.71x0.80
inches
(17.96x20.29
mm).
Shared on
April 27th, 2015 05:27.
Simple breakout board for the ESP8266 chip to provide wifi capability to the Teensy 3.1. Designed to take power from VIN via USB or LiPo battery and convert to 3V3 with a TLV7333 300 mA voltage regulator. Also on board is a Macronix 4 Mbit MX254006E SPI Flash memory chip. Small rgb led indicates power on, pcb antenna matched to 2.4 GHz. Can use either 26 or 40 MHz Seiko Epson crystal. The board has the same eight pins as the cheap Chinese modules as a first cut to see how hard it is to add wifi to Teensy 3.1 projects. The board is designed to solder directly on top of the Teensy just above the USB plug.
ATTinyX8 v1.0
by
BrentBlueAllen.
2
layer board of
0.62x1.40
inches
(15.62x35.59
mm).
Shared on
April 27th, 2015 00:12.
Breakout board for ATTinyX8 family of MCUs
EMW3162 Breadboard Adapter V1.1
by
Anibit.
2
layer board of
1.03x1.58
inches
(26.14x40.11
mm).
Shared on
April 26th, 2015 21:59.
Updated v1.1 Breadboard adapter for MxChip EMW3162 Wifi module. This is currently untested(my boards have been ordered), feedback is appreciated at spider[at]anibit[dot]com.
amiketo/2015-04
by
jaw.
4
layer board of
2.72x1.38
inches
(69.01x35.00
mm).
Shared on
April 26th, 2015 21:04.
amiketo/2015-04
amiketo-usb/2015-04
by
jaw.
2
layer board of
0.89x0.57
inches
(22.50x14.50
mm).
Shared on
April 26th, 2015 21:03.
amiketo usb