OSH Park
Shared projects
- You need to sign in or sign up before continuing.
MTN-10DD
by
MTN.
2
layer board of
0.41x0.41
inches
(10.31x10.31
mm).
Shared on
March 18th, 2015 06:13.
Single-Sided LFPAK33 10mm FET Driver
- MCU: attiny13a-MMU
- C1: 0603 - 10uF - X7R
- OTC: 0603 - 1uF - X7R (for off-time FW)
- R1: 0603 - 19.1K - 1%
- R2: 0603 - 4.7K - 1%
- Diode: SOD-323
- FET: LFPAK33
This driver can run all of the normal attiny13a firmware and has all of the performance of the bigger FET drivers.
Now you can have your cake and eat it too: use the same firmware and features that the big drivers use; have super-low resistance; and have a single-sided board for more battery clearance and less chance of shorting.
MTN-12DD
by
MTN.
2
layer board of
0.48x0.48
inches
(12.22x12.22
mm).
Shared on
March 18th, 2015 06:12.
Single-Sided LFPAK33 12mm FET Driver
A bigger version of its little brother, the MTN-10DD. This PCB can be sanded or ground down to 10mm if needed.
- MCU: attiny13a-MMU
- C1: 0603 - 10uF - X7R
- OTC: 0603 - 1uF - X7R (for off-time FW)
- R1: 0603 - 19.1K - 1%
- R2: 0603 - 4.7K - 1%
- Diode: SOD-323
- FET: LFPAK33
This driver can run all of the normal attiny13a firmware and has all of the performance of the bigger FET drivers.
Now you can have your cake and eat it too: use the same firmware and features that the big drivers use; have super-low resistance; and have a single-sided board for more battery clearance and less chance of shorting.
Antenna Switch V2.0
by
Sccamp.
2
layer board of
0.66x0.58
inches
(16.87x14.73
mm).
Shared on
March 18th, 2015 03:39.
A little smaller pcb of the switch. Completely untested!
Unified - CC2538 Mk 3
by
exziled.
4
layer board of
1.24x1.72
inches
(31.37x43.69
mm).
Shared on
March 18th, 2015 03:08.
N64
by
eminthepooh.
2
layer board of
1.41x2.08
inches
(35.76x52.76
mm).
Shared on
March 17th, 2015 23:42.
N64 A, B, and C buttons