OSH Park
Shared projects
- You need to sign in or sign up before continuing.
Ramps1.4
by
Styder.
2
layer board of
4.00x2.38
inches
(101.60x60.33
mm).
Shared on
March 15th, 2015 19:55.
Ramps1.4
ShapeOko 2 - Limit Switch - Main Board
by
afterhoursengineering.
2
layer board of
5.00x1.10
inches
(127.03x27.97
mm).
Shared on
March 15th, 2015 16:50.
This is an interface board that works with the Hall Effect Sensor Board to communicate with the Shapeoko 2 Arduino Board’s end stops/homing inputs.
ESPkit-01 Version 1.1
by
mage0r.
2
layer board of
0.79x0.99
inches
(20.12x25.12
mm).
Shared on
March 15th, 2015 04:19.
ESP-01 learning board. Check out https://github.com/mage0r/ESPkit-01 and https://github.com/geekscape/nodemcu_esp8266 for more info!
Fuzz Rite
by
culturejam.
2
layer board of
1.14x0.91
inches
(28.91x23.11
mm).
Shared on
March 15th, 2015 01:24.
Silicon Fuzz Rite. Schematic: https://db.tt/PiJ9SNxh
DCMotorController.v02
by
PeskyProducts.
2
layer board of
0.71x0.61
inches
(17.91x15.39
mm).
Shared on
March 15th, 2015 01:23.
Updated DC brushed motor controller intended as an add-on for Teensy 3.x. TI’s CSD13383F4 FemtoFets replace the SOT-23 PMV31XN MOSFETS and Comchip’s CDSQR4148-HF high-speed switching diodes replace the SOD-323 1N4148 diodes of the previous board. The new components are super small, and I made the traces wider and attempted to provide a good thermal sink for the 12 V, 2.9 A FETs. The board can be used standalone in a breadboard or, better, attached directly to a Teensy 3.x to use the PWM output at pins 3, 4, 22, 23.