OSH Park
Shared projects
ESP 01/02 Programmer
by
gamaral.
2
layer board of
1.44x0.80
inches
(36.50x20.32
mm).
Shared on
March 12th, 2015 17:20.
Adafruit FTDI Friend to ESP8266 Module Programmer
R1 = 1k-10k pull-up (or just solder bridge) C1 = 100nF adjust to your need (it’s optional)
Andy 20 Ramble 20 Fx 20 Marvel 20 Drive
by
andregarcia57.
2
layer board of
1.91x1.18
inches
(48.41x29.92
mm).
Shared on
March 12th, 2015 14:10.
SharpMemoryLCDDisplay.v01
by
PeskyProducts.
2
layer board of
1.30x1.06
inches
(33.02x26.85
mm).
Shared on
March 12th, 2015 05:17.
Test board for Sharp Memory LCD 128 x 128 pixel, 130 microAmp display.
SmallPiezoSounder.v01
by
PeskyProducts.
2
layer board of
0.29x0.25
inches
(7.32x6.45
mm).
Shared on
March 12th, 2015 02:14.
Test board for very small 4 kHz piezo sounder.
Boscam 32CH Tx v0.2
by
O_Shovah.
2
layer board of
1.20x0.75
inches
(30.40x19.15
mm).
Shared on
March 12th, 2015 02:08.
new: C&D tantals, SU or SSU ATTiny, 4-6 pin molex, RC input possible
5.8GHz FPV Transmitter using a Boscam TX5823 module. The molex connector is compatible to FT952. Schematics and code by JReise, for more details see forum post (german) http://fpv-treff.de/viewtopic.php?f=23&t=5974
4,50$/3 Pieces
BOM:
| C1,C2 | 220-470µF | [2312/2917] Tantal Caps (C/D) |
| C3 | 100nF | [0805] Ceramic Cap |
| R1 | 150-300Ohm | [0805] Resistor |
| R2 | 4,7kOhm | [0603] Resistor |
| D1 | [0805] LED | |
| J1 | 4-6 Pins | Molex PicoBlade |
| J2 | (RP-)SMA edge mount connector | |
| S1 | Tactile Switch KMS221G LFS | |
| U1 | Boscam TX5823 | |
| U3 | Pololu D24V6F3 | |
| U4 | ATTiny13-20SU or SSU |