OSH Park
Shared projects
SPIFlashBoard.v01y
by
PeskyProducts.
2
layer board of
0.71x0.31
inches
(17.91x7.75
mm).
Shared on
March 4th, 2015 10:26.
Appallingly small Teensy 3.x add-on board with 16 Mbytes of fast serial flash memory using an SPI communications interface. Pin out and 5 mm x 6 mm WSON package common to Spansion and Winbond flash chips so either can be used. Board mounts onto the non-USB end of Teensy 3.x or Teensy-LC. Added bypass capacitor and CS pullup resistor.
SPIFlashBoard.v02x
by
PeskyProducts.
2
layer board of
0.71x0.35
inches
(17.91x8.79
mm).
Shared on
March 4th, 2015 10:26.
Appallingly small Teensy 3.x add-on board with 128 Mbytes of fast serial flash memory using an SPI communications interface. BGA-24 package Spansion S70FL1GS flash chip. Board mounts onto the non-USB end of Teensy 3.x or Teensy-LC. Designed so it does not interfere with the I2C port on pins 16/17 of the Teensy 3.1. Added CS pullup resistors.
ICS43432.Digital.I2S.Microphone.v01
by
PeskyProducts.
2
layer board of
0.31x0.41
inches
(7.77x10.29
mm).
Shared on
March 4th, 2015 10:26.
Invensense’s latest digital MEMS microphone with 24-bit I2S serial data output in a smaller, higher S/N package.
EQ Talons
by
andregarcia57.
2
layer board of
1.97x1.73
inches
(50.01x43.82
mm).
Shared on
March 4th, 2015 03:22.
iTHP-5-DB9 Probe Receiver
by
KC2QII.
2
layer board of
2.70x1.75
inches
(68.58x44.48
mm).
Shared on
March 4th, 2015 01:19.
Receiver unit for iTHP-5-DB9 Probe Driver. Can extend I2C data via CAT5/6 cables over 500 feet.