OSH Park
Shared projects
LCD Dufflebag SMD Mark 3
by
schizobovine.
2
layer board of
3.15x1.42
inches
(80.01x36.02
mm).
Shared on
December 16th, 2014 21:21.
Controls a “standard” LCD over I2C.
Designed to be attached to the back of the LCD, either monochrome or RGB, component side /facing/ the back of the LCD. This leaves the back almost entirely bare, so less worry about shorts and whatnot when mounting. (I should make a version that uses SMT connectors to the LCD.)
Attiny84-based, with AVR ISP broken out as a non-standard 6-pin connector. The layout was choosen to take advantage of the fact that SPI and I2C use the same pins on Attiny84’s, meaning only one connector is needed for both programming and field use.
For more schematics, non-working firmware, and potentially help, see the github repo.
350W PSU with Universal AC Input and 28V Output
by
gigneil.
2
layer board of
6.61x3.71
inches
(167.92x94.23
mm).
Shared on
December 16th, 2014 20:58.
Courtesy TI PMP-9531
ForkinBrain X18
by
sporadic.
2
layer board of
0.94x1.43
inches
(23.98x36.35
mm).
Shared on
December 16th, 2014 16:01.
ForkinBrain - 18 Channel Xmega model
315/433mhz transmitter PIC
by
JH.
2
layer board of
0.84x1.35
inches
(21.26x34.29
mm).
Shared on
December 15th, 2014 22:18.
Temperature transmitter with 12f683 and 3 DS18B20 sensors. Includes programming header
Scoregasm Power Board
by
dkpinball.
2
layer board of
1.37x2.30
inches
(34.82x58.42
mm).
Shared on
December 15th, 2014 20:51.
Power Distribution Board for Scoregasm