OSH Park
Shared projects
K6BEZ Arduino Antenna Analyser
by
goboxgizmos.
2
layer board of
3.72x2.42
inches
(94.49x61.39
mm).
Shared on
December 12th, 2014 01:42.
https://groups.yahoo.com/neo/groups/k6bez_projects
de0nano DP83848 ethernet adapter
by
Frankalicious.
2
layer board of
0.75x2.20
inches
(19.15x55.98
mm).
Shared on
December 11th, 2014 23:30.
ATTiny85 Password Stick
by
goboxgizmos.
2
layer board of
1.62x0.48
inches
(41.10x12.19
mm).
Shared on
December 11th, 2014 21:45.
Stolen from http://codeandlife.com/2012/03/03/diy-usb-password-generator/
Install this device into your USB port and it will print the current password. Password can be changed with a few key presses (see video on above website).
electric imp development board; Kelly
by
themzlab.
2
layer board of
2.24x2.28
inches
(56.90x57.91
mm).
Shared on
December 11th, 2014 14:36.
RS232 and CSAFE interface to electric imp imp001
truzzi 3-channel, high power RGB LED driver V1.0
by
WarHawk-AVG.
2
layer board of
1.04x1.40
inches
(26.52x35.64
mm).
Shared on
December 11th, 2014 08:02.
truzzi 3-channel, high power RGB LED driver V1.0
2 layer board of 1.04x1.4 inches (27x36mm). $7.30 for three.
C1, C2, C3: 22uF tantalum capacitors (DigiKey part number: 399-3781-1-ND)
D1, D2, D3; Schottky diode 2A SMA package (DigiKey part number: B240A-FDICT-ND)
L1, L2, L3: 68uH power inductor, 0.7A (DigiKey part number: PCD2117CT-ND)
R1, R2, R3: 0.33ohm resistors, 0805 package.
4x screw terminals, 3.5mm (bought mine on Tayda Electronics)
3x PT4115 drivers.
1x 4-pin + 1x 2-pin male or female headers.