OSH Park
Shared projects
WM2999 Ver1.3
by
KingOfKYA.
2
layer board of
2.25x1.58
inches
(57.20x40.23
mm).
Shared on
August 27th, 2014 00:42.
NinjaCube
by
KingOfKYA.
2
layer board of
1.00x1.00
inches
(25.43x25.32
mm).
Shared on
August 27th, 2014 00:42.
RJ45 to Header
4x4x7Segment
by
sirkha.
2
layer board of
0.81x1.99
inches
(20.47x50.44
mm).
Shared on
August 26th, 2014 07:41.
This is a small board with a lot of digits. Featuring four HP 4-digit 7-segment bubble displays on a board designed to be mated with the Adafruit HT16K33 breakout, this will quickly allow you to display four values using i2c. Source Files can be found on GitHub.
Note, the board to board connector on this version does not support normal header strip (the holes are too small) either use wire or appropriately sized machine pin connectors such as these.
Mounting:
- Solder a right angle header strip to the bottom header for vertical mounting.
- Solder straight header strips to the bottom or both headers for horizontal mounting.
- The top header is not electrically connected and is for more stable horizontal mounting.
DEFCON 22 Badge Proto Board
by
sixvolts.
2
layer board of
2.81x2.23
inches
(71.40x56.54
mm).
Shared on
August 26th, 2014 03:42.
Breadboard/Protoboard
3pin2eurorack
by
qp.
2
layer board of
0.90x0.74
inches
(22.89x18.72
mm).
Shared on
August 26th, 2014 01:08.
power connection coverter