OSH Park
Shared projects
- You need to sign in or sign up before continuing.
22mm contact board for 20/17mm driver
by
Red.
2
layer board of
0.87x0.87
inches
(22.12x22.15
mm).
Shared on
May 25th, 2014 22:25.
v9b – 16mm tabs for 17mm driver or file to the inside of the purple line to get a 18mm circle for a 20mm driver. Aesthetic change to tab/via orientation.
22mm contact board for 20/17mm driver
by
Red.
2
layer board of
0.87x0.87
inches
(22.12x22.12
mm).
Shared on
May 25th, 2014 21:07.
v8 – 16mm tabs for 17mm driver or file to match outer radius to get a 18mm circle for a 20mm driver.
Genesis/MegaDrive Model 1 S-Video Mod
by
Helder.
2
layer board of
0.57x0.67
inches
(14.60x17.07
mm).
Shared on
May 25th, 2014 17:57.
-(1) 6.3v, 220uF aluminum capacitor.
-(1) 2N3904 NPN general purpose transistor.
-(1) 75 Ohm resistor.
-(1) 27 Ohm resistor.
Connect pins 15 and 16 from CXA1145 video chip to board.
4x7 LED Display Module
by
kafkal.
2
layer board of
2.50x1.12
inches
(63.42x28.52
mm).
Shared on
May 25th, 2014 16:21.
4x7 LED Display Module
26mm contact board for 17mm driver
by
Red.
2
layer board of
1.03x1.03
inches
(26.11x26.11
mm).
Shared on
May 25th, 2014 04:09.
v4 – 16mm hole for 17mm driver w/ 0.5mm of overlap. 1.5mm wide exposed copper area leaves 1mm for soldering iron.