OSH Park
Shared projects
PIDDYBOT_V3_BT
by
IHPArchives.
2
layer board of
1.89x2.95
inches
(47.96x75.01
mm).
Shared on
May 7th, 2014 00:41.
Bluetooth PIDDYBOT
Triac Fanout Rev1
by
boxysean.
2
layer board of
4.04x2.60
inches
(102.57x66.04
mm).
Shared on
May 6th, 2014 22:48.
Shift register to 8x triacs
SHARP Memory LCD BoosterPack
by
chicken.
2
layer board of
1.96x1.56
inches
(49.89x39.73
mm).
Shared on
May 6th, 2014 17:42.
BoosterPack for TI LaunchPad. For more information see project log on 43oh
CamCruiser IntelliLED WS2812B Mount 0r1 - 2pcs. panel
by
aBUGSworstnighmare.
2
layer board of
2.52x2.28
inches
(64.01x58.01
mm).
Shared on
May 6th, 2014 17:31.
LED mount for CamCruiser folding quad airframe
BOM (per PCB):
6x WS2812B 5050 LED
6x 100nF/50V 0805size caps (i.e. Digikey 311-1140-1-ND)
1x JST S4B-ZR(LF)(SN) (Digikey 455-1671-ND)
1x JST ZHR-4(P) (Digikey 455-1202-ND)
ATTENTION: ARROW INDICATOR ON LED IS PIN1!!!
Released under creative commons Attribution-NonCommercial-NoDerivatives 4.0 International (CC BY-NC-ND 4.0) You are free to: Share: copy and redistribute the material in any medium or format The licensor cannot revoke these freedoms as long as you follow the license terms.
Under the following terms: Attribution: You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.
NonCommercial: You may not use the material for commercial purposes.
NoDerivatives: If you remix, transform, or build upon the material, you may not distribute the modified material.
No additional restrictions: You may not apply legal terms or technological measures that legally restrict others from doing anything the license permits.
Notices: You do not have to comply with the license for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation. No warranties are given. The license may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
THIS PROJECT IS PROVIDED “AS IS” AND WITH ALL FAULTS. NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS PCB. THE AUTHOR SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
ATtiny85V Energy Harvesting- Sensor Platform - Rev A.
by
siahman.
2
layer board of
1.82x1.49
inches
(46.23x37.87
mm).
Shared on
May 6th, 2014 13:40.
Includes two sensor inputs, solar panels and buck regulator with settable hysteresis. Runs on 0.550µA quiescent current, with wake up from power good interrupt. Able to harvest energy from included solar panels or from piezo input, while sensing on two ADC’s.