OSH Park
Shared projects
Solar battery monitor
by
kallisti5.
2
layer board of
2.09x2.25
inches
(53.04x57.15
mm).
Shared on
March 29th, 2014 16:57.
12v solar battery charge monitor w/fuse
RGB Tiny Class
by
ATTiny.
2
layer board of
1.79x1.00
inches
(45.39x25.40
mm).
Shared on
March 29th, 2014 16:40.
Control a RGB LED w/ATTiny45
FixelCassette1x1v3
by
Fixels.
2
layer board of
2.37x0.32
inches
(60.27x8.08
mm).
Shared on
March 29th, 2014 06:42.
Fixel Cassette 1x1 v3
Bluetooth Serial Adapter for OpenTrackers/TinyTrak
by
KC8UFV.
2
layer board of
0.69x1.35
inches
(17.45x34.29
mm).
Shared on
March 29th, 2014 01:48.
Uses generic HC04 or HC06 bluetooth adapter, MAX16910 & MAX3233. X1 is to bring out the 2nd serial port if your device supports it. A Female DB9 connector fits on one end of the board and the bluetooth adapter board hangs off the other end. This board was based off the reference schematic for the HC04, and adapted to fit the pinout of the serial port of the OpenTracker USB and TinyTrak3+, both of which can provide power out of the port. Standard RS232 signalling is available, and the unit will work from 3.5 to 30V on the power input rail.
Please note, there is a bug on this board where the 3.3v rail did not route from the voltage regulator to the level converter.
Wireless Board V1.3
by
Ruben.
2
layer board of
1.47x2.45
inches
(37.26x62.33
mm).
Shared on
March 28th, 2014 17:31.
Breakout board for arduino pro mini 3.3v, with an nRF2401+ connection. Also includes 4-DIP switches and a pot. The I2C and SPI lines are also broken out.