OSH Park
Shared projects
Banana => Eurorack power rev2
by
indigoid.
2
layer board of
1.21x2.28
inches
(30.81x57.79
mm).
Shared on
January 15th, 2017 10:37.
Simple adapter to conveniently run a single Eurorack module from a bench power supply (eg. to measure current draw)
ILI9341 Touch connector
by
RogerParkinson.
2
layer board of
0.94x1.50
inches
(23.83x38.10
mm).
Shared on
January 15th, 2017 05:28.
ILI9341 connector for 14 pads + 4 pads for touch, broken out to 14 connector pins using a touch controller. It is a clone of the PCB for this screen but without the SD card and the PCB is much smaller making it useful when you have very little room to mount it. The screen itself is available separately here To build this you need a couple of resistors and ceramic capacitors as well as an RT9169 and a touch controller. I used solder paste etc for the smd parts but I hand soldered the screen. It is fiddly work but I don’t think it is a good idea to put the screen through an oven or hot plate. Be careful when soldering the screen to the board. The connections are very fine and, when soldered, rather fragile. Make sure you stick the board and screen together somehow, such as double sided tape, to prevent strain on the connection. It is important to get the screen connection around the right way. Check carefully before you solder. For details on connecting the resulting board to your processor see PJRC’s instructions
VNC2 Debug Module
by
alfishe.
2
layer board of
1.18x0.79
inches
(30.02x20.02
mm).
Shared on
January 15th, 2017 04:47.
See more details: https://github.com/mvvproject/ReVerSE-U16/tree/master/u16_board/modules/v2debug
Diode_Ring3.zip
by
WA7MLH.
2
layer board of
1.24x0.60
inches
(31.60x15.34
mm).
Shared on
January 15th, 2017 04:27.
F4-Brushless-Hex-Dshot-V1.zip
by
AlienFlightNG.
4
layer board of
1.10x1.26
inches
(28.02x32.00
mm).
Shared on
January 15th, 2017 03:16.