OSH Park
Shared projects
Pendelautomatik
by
Rasmus.
2
layer board of
1.59x1.39
inches
(40.31x35.31
mm).
Shared on
September 28th, 2016 10:02.
Pendelautomatik för en eller två riktningar
HC-SR04 Shield v1.brd
by
aaronjasso.
2
layer board of
1.00x1.10
inches
(25.43x27.94
mm).
Shared on
September 28th, 2016 04:33.
Wemos D1 Mini shield for connecting up to two HC-SR04 ultrasonic distance sensors. Includes logic level shifting both ways.
Version 1.0
SENSE1 tested and verified. SENSE2 untested.
Issue: hole spacing is not 0.1" as intended for SENSE2 connection, so the intended JST PH-4 header will not work. Wires may still be soldered directly to the board.
EAGLE files available at https://github.com/aaronjasso/HC-SR04--x2--WeMos-D1-Mini-Shield
OSD Alpha rev2
by
TimKostka.
2
layer board of
1.62x4.50
inches
(41.17x114.30
mm).
Shared on
September 27th, 2016 23:17.
A cheap color OSD for FPV pilots.
This is a development board.
Extron audio adapter
by
Konsolkongen.
2
layer board of
0.67x1.18
inches
(17.02x30.02
mm).
Shared on
September 27th, 2016 20:29.
Small PCB that lets you connect 3.5mm jack or phono (with adapter) to Extron’s matrix switcher series easily. The connectors usually used for Extron’s inputs are still needed, and will be tightened to tabs soldered to pads at the top of the board. The jumper should be shorted when used for inputs.
mbed CI Test Shield v1.0.1
by
mbedAustin.
2
layer board of
2.10x2.15
inches
(53.37x54.64
mm).
Shared on
September 27th, 2016 20:27.
mbed CI Test Shield v1.0.1 - DIY Edition