OSH Park
Shared projects
uBlox GPS Cape
by
Hewball.
2
layer board of
3.40x2.15
inches
(86.39x54.64
mm).
Shared on
September 9th, 2016 05:01.
uBlox MAX series GPS Cape for using a Beaglebone as an NTP Stratum 1
Github link for source files https://github.com/hewball/uBlox-GPS-Cape
Laen's Shift Register Demo v2
by
Jenner.
2
layer board of
4.11x1.41
inches
(104.29x35.71
mm).
Shared on
September 9th, 2016 00:27.
Provides eight output LEDs driven by an HC595 shift register with input press-buttons for data, clock, and latch to demonstrate how a shift register works.
The Github repo has the design and parts list.
This project is released under the Open Hardware License v1.2.
lights and buzzers
by
pfriedel.
2
layer board of
1.38x0.39
inches
(35.00x10.01
mm).
Shared on
September 8th, 2016 22:29.
Now with data out. Only 35mm wide, for really tight builds. The beeper is this:
https://www.digikey.com/product-detail/en/pui-audio-inc/AI-1027-TWT-5V-2-R/668-1454-ND/5011389
Although I suspect any 9.6mm diameter active buzzer would work. Notably, that rules out most eBay options which are 12x9.6 or thereabouts.
GPSAddOn.v01a
by
PeskyProducts.
4
layer board of
1.01x1.41
inches
(25.55x35.71
mm).
Shared on
September 8th, 2016 22:07.
GPS and 3-D orientation sensor add-on for Dragonfly STM32L4 Dev Board. Added rechargeable backup battery, led for PPS, and bypass cap for VDDIO.
RF24 + AVR + Joystick
by
TorstenC.
2
layer board of
1.20x0.40
inches
(30.48x10.19
mm).
Shared on
September 8th, 2016 20:01.
Arduino Pro Mini with NRF24L01+ or SE8R01 and Joystick