OSH Park
Shared projects
Teensy LC with OLED & Touch [f37453f]
by
fustini.
2
layer board of
2.61x2.37
inches
(66.27x60.20
mm).
Shared on
July 20th, 2016 00:44.
NEWER VERSION: Teensy LC cap touch demo (5fb2f44)
Description
Teensy LC with SPI 128x64 OLED and Cap Touch
Bill of Materials:
GitHub
- Repo: teensy-big-oled
- File: teensybig-oled.kicad_pcb
- Commit: f37453f
Known Issue:
- OLED GND not connected to GND plane
- Fix: solder wire from OLED GND to TEENSY GND
UNTESTED: Teensy LC with BMP280 & OLED [b8410df]
by
fustini.
2
layer board of
1.98x2.04
inches
(50.19x51.89
mm).
Shared on
July 20th, 2016 00:44.
UNTESTED
Description
Teensy LC with BMP280, OLED and cap touch buttons
Bill of Materials
- Teensy LC
- Adafruit 128x64 OLED (SPI)
- Adafruit BMP280 Temp/Pressure sensor (I2C)
GitHub
- Repo: oled-bmp280-touch
- Commit: b8410df
- File: oled-bmp280-touch.kicad_pcb
UNTESTED: Teensy LC with ESP-01 [5d10027]
by
fustini.
2
layer board of
2.30x1.93
inches
(58.47x49.00
mm).
Shared on
July 20th, 2016 00:43.
UNTESTED
Description
- Teensy LC with ESP-01 breakout for ESP8266 WiFi SoC
GitHub
- Repo: esp8266-teensy
- File: esp8266-test.kicad_pcb
- Commit: 5d10027
PulseSensorRing.brd
by
orlandohoilett.
2
layer board of
1.20x0.60
inches
(30.48x15.27
mm).
Shared on
July 19th, 2016 22:50.
1-Cell Lithium 3V3 Buck Boost Regulator
by
GijsvanBerne.
2
layer board of
0.50x0.56
inches
(12.62x14.33
mm).
Shared on
July 19th, 2016 19:41.
TPS63031 buck boost fixed 3v3 regulator module. In: 1.8-5.5v, out: 500 / 800mA. 1 x 0603 0.1uF cap, 3 x 0805 10uF cap, 4 x 2.54mm Pinheaders, 1 x LPS3015 1.5uH inductor. Good for 3v3 from single lithium cell, roughly the same size as a TO-220, caps included…