OSH Park
Shared projects
BGM111-Breakout-V0.3.0
by
ryankurte.
2
layer board of
1.23x1.34
inches
(31.22x33.96
mm).
Shared on
May 31st, 2016 03:13.
Minimal breakout for the BGM111 BLE Module
SI4703_AddOn.v01
by
PeskyProducts.
4
layer board of
0.71x0.61
inches
(17.91x15.39
mm).
Shared on
May 31st, 2016 02:04.
Straightforward copy of Sparkfun’s SI4703 FM Tuner Evaluation Board (https://www.sparkfun.com/products/12938) with SI4703 radio and TPA6111A2 amplifier here as a much smaller add-on for Teensy or Dragonfly. The add-on is intended to be mounted onto pins 8/9/10 and 15/16/17 of the Teensy (or 8/9/10 and 30/21/20 of Dragonfly) and take power and GND from the power port at the end of the MCU. Standard 3.5 mm phone jack for headphones should allow good FM reception in a portable, battery-powered package.
OVM7690 Breakout Board
by
ConradFarnsworth.
2
layer board of
0.57x0.40
inches
(14.60x10.03
mm).
Shared on
May 30th, 2016 20:38.
Throwaway Camera Blocks?
Spixels - 16 SPI LED Strip Raspberry Pi Adapter
by
hzeller.
2
layer board of
2.52x2.21
inches
(64.11x56.11
mm).
Shared on
May 30th, 2016 19:37.
Adapter to control up to 16 SPI LED strips with a Raspberry Pi provided in the Spixels project.
The Spixels library and PCB to control SPI-type LED strips was originally developed for the Noisebridge Flaschen-Taschen project, but broken out as separate project because it is independently useful for many other LED strip applications.
If you want to power your strips through the board, consider the 2oz copper option of OshPark.
SYNCSTRIPPERmini.zip
by
SRDWA.
2
layer board of
0.26x0.65
inches
(6.50x16.54
mm).
Shared on
May 30th, 2016 19:14.
A small Sync stripper for installation in a Scart connector.