OSH Park
Shared projects
- You need to sign in or sign up before continuing.
HydroSense Wireless Link
by
erp006.
4
layer board of
2.88x2.50
inches
(73.08x63.55
mm).
Shared on
May 26th, 2016 02:28.
R2.0.1
Multi-Level Converter
by
petroski.
4
layer board of
5.08x2.77
inches
(128.91x70.43
mm).
Shared on
May 25th, 2016 23:39.
EE391: Winter/Spring 2016 (not tested)
STM32-QFP48-breakout rev1 aka 'the bat board'
by
flabbergast.
2
layer board of
1.41x0.71
inches
(35.71x17.93
mm).
Shared on
May 25th, 2016 22:36.
A teensy-sized breakout board for QFP-48 STM32 MCUs (rev1). Originally designed for STM32L052CxTx, but should work with any pinout-compatible MCUs (most of LQFP-48 packaged STM32s should work, but check the datasheet!).
Intended for low-power applications (e.g. sensors).
Features:
- hand-solderable (0603, SOT-563 regulator, LQFP-48 (0.5mm pitch) MCU)
- power options (USB <-> solder jumper <-> VIN <-> regulator <-> solder jumper <-> VDD net) - so it is possible to bypass the voltage regulator entirely; or add a LIPO-charger external module.
- analogue supply optionally routed through a ferrite bead, and a footprint for an extra stabilising capacitor
- 1 LED, reset button, user button (routed to BOOT0 and PA1) {hence the user button can be used to enter the built-in bootloader}
- a footprint for adding an external high-frequency crystal (required for STM32L1* for USB)
1In 1Out ESP01 V2
by
Electrico.
2
layer board of
1.10x1.93
inches
(28.02x49.00
mm).
Shared on
May 25th, 2016 20:11.
1In and 1Out with relay ESP01 V2
Remote temperature probe with ESP01
by
Electrico.
2
layer board of
1.10x1.30
inches
(28.02x33.07
mm).
Shared on
May 25th, 2016 20:11.
Remote temperature probe with ESP01 using DS18S20