OSH Park
Shared projects
- You need to sign in or sign up before continuing.
ADC Bo
by
freespace.
2
layer board of
2.92x1.42
inches
(74.04x35.97
mm).
Shared on
April 24th, 2016 02:31.
LED Driver
by
seanwatson.
2
layer board of
1.59x1.30
inches
(40.31x33.02
mm).
Shared on
April 24th, 2016 01:49.
RGB LED Driver Circuit
MCP79412 RTC V1.2
by
2
layer board of
1.10x1.15
inches
(27.94x29.24
mm).
Shared on
April 23rd, 2016 21:10.
MCP79412 Real-Time Clock Breakout Board
ATX-PSU
by
nicolasnoble.
2
layer board of
2.95x2.02
inches
(74.93x51.31
mm).
Shared on
April 23rd, 2016 20:56.
Small ATX PSU adapter, mainly for 12V loads, such as 3D printers.
DigiKey cart for 3 boards: http://www.digikey.com/short/3jh47j
RLoad need to be a couple of ~5W+, 20 ohm resistors. They’ll dissipate some heat. It’s needed for some ATX PSUs to be stable.
The LEDs will be powered on with 5v.
The power connectors are https://www.sparkfun.com/products/8432
The power on switch in the middle is something along the lines of http://www.amazon.com/dp/B00BT9FVTQ - The switching on portion needs to be between ground and PwrON. Basically, if using that switch, gnd=C and led-, pwron=NO (the center one), and 12v=led+.
Everything else is pretty standard and straightforward.
Servoshock Rev1.2
by
CrossProductCreations.
2
layer board of
0.73x2.63
inches
(18.57x66.80
mm).
Shared on
April 23rd, 2016 20:47.
Servoshock Rev1.2