OSH Park
Shared projects
apm sub hub
by
skyscraper.
4
layer board of
1.59x1.59
inches
(40.39x40.39
mm).
Shared on
April 6th, 2016 01:04.
sub hub pcb for distributed apm system. The subhub is designed to go into a wing. It allows the wing electonics to be connected to the fuselage with a single 4 way connector. The connector also provides power output to the servos of 5 volts at up to 2 Amps at from 7 to 25 volts input . The protype board can control 2 servos, a gps , an RC receiver , an analog input such as an airspeed sensor, and an I2c input such as a magnetometer
AIR_LCD Geiger counter
by
garyStofer.
2
layer board of
2.06x1.14
inches
(52.35x28.85
mm).
Shared on
April 5th, 2016 23:52.
Geiger counter modul for AIR-LCD main pcb see schematic here https://github.com/garyStofer/Geiger
GSM DIN
by
hitech95.
2
layer board of
1.18x3.39
inches
(29.85x86.06
mm).
Shared on
April 5th, 2016 22:50.
GSM DIN TP4056 Lipo charger 3.3V LowDrop Onboard regulator ESP-12 Onboard MCU Onboard Omron SSR 2A with fuse GSM SIM800L board (Header)
IAPS_FMS_EXTENDER
by
kprice.
2
layer board of
8.76x8.51
inches
(222.40x216.05
mm).
Shared on
April 5th, 2016 21:02.
IAPS_FMS_EXTENDER
Photon Relay Board V2
by
TomForti.
2
layer board of
1.91x2.63
inches
(48.56x66.68
mm).
Shared on
April 5th, 2016 21:02.
Photon Relay Board V2