OSH Park
Shared projects
WeMos Multipurpose Board
by
Geo.
2
layer board of
1.15x2.65
inches
(29.24x67.34
mm).
Shared on
March 12th, 2016 17:29.
ultrasonic sensor
by
manuel.
2
layer board of
2.94x1.09
inches
(74.78x27.76
mm).
Shared on
March 12th, 2016 17:13.
ultrasonic sensor pcb with two MA40S4 by Mathew Turnell.
https://turnelltech.wordpress.com/2013/01/11/building-an-ultrasonic-sensor/
RasPi RFM69W shield (room for improvement)
by
hannes.
2
layer board of
1.37x1.03
inches
(34.90x26.24
mm).
Shared on
March 12th, 2016 16:00.
A RaspberryPi shield for the RFM69W module.
The shield is functional, but I have some ideas for improvements:
- pin DIO5 of the RFM69W module should be connected to a different pin on the Raspberry Pi connector
- the pads for the RFM69W module should could be larger to make it easier to solder the shield by hand
- the unconnected pin of the RFM69W module should be connected to ground
NRF24L01+ BB adapter
by
GertSanders.
2
layer board of
0.62x0.55
inches
(15.85x13.84
mm).
Shared on
March 12th, 2016 15:36.
NRF24L01+ Breadboard adapter - untested
ECU Tool
by
SmartNet.
2
layer board of
2.10x2.89
inches
(53.34x73.36
mm).
Shared on
March 12th, 2016 12:39.
CAN and K-LINE interfaces https://github.com/fjvva/ecu-tool/wiki