OSH Park
Shared projects
- You need to sign in or sign up before continuing.
TEST: BeagleLogic v1.1
by
fustini.
2
layer board of
2.15x2.80
inches
(54.71x71.02
mm).
Shared on
March 2nd, 2016 02:37.
[UPDATE: 2016-06-02] Uploaded KiCad PCB file from GitHub repo: https://oshpark.com/projects/afSmusg1
THIS IS NOT TESTED! Kumar: you can get the gerbers from https://goo.gl/kku0VM (drill is in a separate folder), although the folder says “rev1” but they’re for v1.1
Genesis RGB to YPbPr V1.1B
by
SwampFox56.
2
layer board of
1.24x1.28
inches
(31.55x32.44
mm).
Shared on
March 2nd, 2016 00:02.
Very prototypal.
Up Down Led Selector
by
Junes-PhD.
2
layer board of
2.01x1.46
inches
(50.95x36.98
mm).
Shared on
March 1st, 2016 22:40.
SIl to DIL adpater
by
Altitude909.
2
layer board of
0.59x1.63
inches
(14.94x41.30
mm).
Shared on
March 1st, 2016 19:59.
12vAuto3to8
by
cmaxwell.
2
layer board of
1.96x2.02
inches
(49.73x51.31
mm).
Shared on
March 1st, 2016 19:26.
Binary converter for 12v car lights. Used to convert digital (‘ABC’ wires) output from GM transmission to directly power 12v dash lights (P,R,N,D,2,Low,…) in older cars.
IC1: CD4011BE
IC2-4: CD4023BE
R1-8: 1k
R9-11: 4k7
Q1-8: 2N2907
Headers are 5mm screw terminals (though it may be just as easy to solder wires directly in). J16: A/B/C (binary inputs). J17: power and ground. J18-20 power outputs.
Can use jumper J1 to pull inputs high (as I needed) or low.
Can use jumper J3 (and switch 2N2907 transistors to 2N2222) to make this a low-side output switch.