PLEN Playground - Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Head ======

===== Table of Contents =====
  * [[arms]]
  * [[legs]]
  * [[head]] **Current section**
  * [[body]]

----

===== Overview =====
^ 3D Printer Used     ^ Print Region                ^
| Afinia H480         | Head                        |
| {{h480.jpg?nolink}} | {{.head:region.jpg?nolink}} |


===== Files that Need to Print =====
==== head.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.15 [mm]    | 30 [deg.]  | Loose | 30 [deg.]     | Fine    | 2h 34m |

=== Placement & Result ===
{{.head:placement:head.jpg?nolink}}
{{.head:result:head.jpg?nolink}}


==== chin.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.15 [mm]    | 30 [deg.]  | Loose | 10 [deg.]     | Normal  | 1h 22m |

=== Placement & Result ===
{{.head:placement:chin.jpg?nolink}}
{{.head:result:chin.jpg?nolink}}

PLEN Playground - Wiki

User Tools

Site Tools

Page Tools