PLEN Playground - Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== Body ======

===== Table of Contents =====
  * [[arms]]
  * [[legs]]
  * [[head]]
  * [[body]] **Current section**

----

===== Overview =====
^ 3D Printer Used     ^ Print Region                ^
| Afinia H480         | Body                        |
| {{h480.jpg?nolink}} | {{.body:region.jpg?nolink}} |


===== Files that Need to Print =====
==== body_front.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.15 [mm]    | 30 [deg.]  | Loose | 45 [deg.]     | Fine    | 2h 42m |

=== Placement & Result ===
{{.body:placement:body_front.jpg?nolink}}
{{.body:result:body_front.jpg?nolink}}


==== body_middle.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.2 [mm]     | 30 [deg.]  | Loose | 10 [deg.]     | Normal  | 1h 52m |

=== Placement & Result ===
{{.body:placement:body_middle.jpg?nolink}}
{{.body:result:body_middle.jpg?nolink}}


==== body_rear.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.15 [mm]    | 30 [deg.]  | Loose | 10 [deg.]     | Fine    | 3h 12m |

=== Placement & Result ===
{{.body:placement:body_rear.jpg?nolink}}
{{.body:result:body_rear.jpg?nolink}}


==== power_switch_holder.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.15 [mm]    | 30 [deg.]  | Loose | 30 [deg.]     | Normal  | 34m    |

=== Placement & Result ===
{{.body:placement:power_switch_holder.jpg?nolink}}
{{.body:result:power_switch_holder.jpg?nolink}}


==== servo_bracket.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | ---        | Solid | ---           | Fine    | 31m    |

=== Placement & Result ===
{{.body:placement:servo_bracket.jpg?nolink}}
{{.body:result:servo_bracket.jpg?nolink}}


==== servo_bracket_mirror.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 2    | 0.15 [mm]    | ---        | Solid | ---           | Fine    | 31m    |

=== Placement & Result ===
{{.body:placement:servo_bracket_mirror.jpg?nolink}}
{{.body:result:servo_bracket_mirror.jpg?nolink}}


==== servo_fixer.stl ====
^ Q'ty ^ Z Resolution ^ Part Angle ^ Fill  ^ Support Angle ^ Quality ^ Time   ^
| 1    | 0.15 [mm]    | 30 [deg.]  | Loose | 10 [deg.]     | Normal  | 19m    |

=== Placement & Result ===
{{.body:placement:servo_fixer.jpg?nolink}}
{{.body:result:servo_fixer.jpg?nolink}}
PLEN Playground - Wiki

User Tools

Site Tools

Page Tools
