PLEN Playground - Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Head ======

===== Overview =====

^ 3D Printer Used     ^ Print Region           ^
| Afinia H480         | Head                 |
| {{h480.jpg?direct}} | {{head_assem.jpg?direct&350}} |

===== Files that Need to Print =====

^ HEAD_A.stl                                                                                                                              ^^^^^^^
^ Q'ty ^ Placement                                        ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                  ^
| 1   | {{head_a_stl.png?direct&120}} | 0.15 [mm]    | Loose | Normal    |  116[min.]    | {{head_a.jpg?direct&120}} |

^ BARB_A.stl                                                                                                                                  ^^^^^^^
^ Q'ty ^ Placement                                            ^ Z Resolution ^ Fill  ^ Quality ^ Output Time ^ Print Result                                      ^
| 1    | {{barb_stl.png?direct&120}} | 0.15 [mm]    | Loose | Normal    |  65[min.]   | {{barb.jpg?direct&120}} |

PLEN Playground - Wiki

User Tools

Site Tools

Page Tools