further work on test environment, changed default display software to…

… builtin
lautr3k · May 6, 2016 · efc71d63f79417ac3c1aa6558fbc73425350e6d4 · efc71d6
1 parent 2710e41
commit efc71d63f79417ac3c1aa6558fbc73425350e6d4
Unified Split

Showing with 9 additions and 5 deletions.

+5 −4 modules/printengine.cfg

+4 −1 modules/printengine.pl
diff --git a/modules/printengine.cfg b/modules/printengine.cfg
@@ -2,7 +2,7 @@
 #Copyright 2016 Robert Koeppl, Fablab Leoben robert.koeppl@fablab-leoben.at
 #http://www.fablab-leoben.at
 #http://www.github.com/fablab-leoben
-#released under the MIT License
+#released under the GPL v2
 #this piece of software is provided with absolutely no warranty
 #use at your own risk
 log_file = "../log/printengine.log"
@@ -21,8 +21,8 @@ endstop_Z_min_type="NC"
 wiper="FALSE"
 door_contact="TRUE" 
 #Defines if there is a door contact to determine if the enclosure is closed
-X_pixels="1192"
-Y_pixels="948"
+X_pixels="912"
+Y_pixels="1140"
 Z_speed="1"
 #mm/s
 Z_max_speed="10"
@@ -41,7 +41,8 @@ vat_target_temperature=""
 check_vat_presence="false" 
 #board specific configuration for Beaglebone Black
 virtual_terminal="1"
-display_software="fbi"
+display_software="builtin"
+#default is the builtin functionality support for other methods not implemented yet. fbi as other option planned next
 display_device="/dev/fb0"
 #PIN asignment
 pin_zmin="testpin"

diff --git a/modules/printengine.pl b/modules/printengine.pl
@@ -3,7 +3,8 @@
 #Copyright 2016 Robert Koeppl, Fablab Leoben robert.koeppl@fablab-leoben.at
 #http://www.fablab-leoben.at
 #http://www.github.com/fablab-leoben
-#released under the MIT License
+#released under the GPL v2
+#unzip code based on https://gist.github.com/eqhmcow/5389877
 #this piece of software is provided with absolutely no warranty
 #use at your own risk
 #configuration is stored in printengine.cfg, do not use hardcoded configuration in ths perl script, that is bad practice.
@@ -18,6 +19,8 @@
 use Sys::Mmap;
 use Graphics::Framebuffer;
 use Time::HiRes;
+use IO::Uncompress::AnyUncompress qw(anyuncompress $AnyUncompressError);
+use IO::File ;
 #import configuration from configuration file
 our $cfg = new Config::Simple();
 $cfg->read("printengine.cfg");