nanoDLP

Hi
I have same problem. Trying Songle srd-05vdc-sl-c with nanodlp.
At setup/shutter using true/false signal, open shutter before each layer, Shutter GPIO: Physical7 BCM4, servo pulses: 2000,1000,500 (no idea what they should be).
With muve3d led is constantly on...
With microlay constanly off...
There does'nt seem to be a tutorial for creating your own machine profile.
Please help

Hi,
I'm having some problems as well...
This is what happened today: I installed NanoDlp on RPi3, and latest  Marlin (https://github.com/mUVe3D/Marlin-mUVe1DLP-Running) on Mega with Ramps 1.4. On Marlin had to alter the motor direction (motor on top) and steps to match the screw. Also the settings for endstop (using optical). Testing from pc (Win7) with KudoTitan the motor and endstop work as they should. Connected the Mega to RPi and tried the Z control from NanoDlp: works. Tried to use default settings and do a dry run. The screen on pc shows the layers being printed but the motor is idle. I could turn the screw by hand, when it should been controlled by Ramps. Changed settings from generic to mUVe, thinking it would play better with their Marlin. Same result with NanoDlp: manual Z control (goes up and down till endstop) works, but nothing when printing.
I installed everything again, tried with and without the latest updates - still same.
Please help