You are not logged in.
Pages: 1
Ok I think I got it figured out, I was able to setup the stable version of nanodlp and then connect it via ethernet to setup wifi. Its working correctly now. Screen orientation was not related to beta, changing the projector resolution does nothing.
Spent all day working on it, cant seem to figure it out. Got the regular version of nanodlp running now on wifi, just needed to plug it into ethernet to set it up on wifi. Still no change. The image is rotated and swapping the numbers in the setup page/projector resolution width and height dont make and change. I also can only show the full hd calibration images, the full white, boundary and the others do not show any image. full hd images show rotated and I cant rotate.
I tried the new config.txt settings but the display wont show any image now. Was working with the previous settings, just wont rotate. Maybe my timings are different?
Can someone explain how to get the hdmi_timings from the custom resolution utility? I have it app running and I can see the detailed resolution settings but im not sure what values relate to what in the config.txt?
Is there a solution to this other than using the Beta version? Im trying to get a new lcd printer going with Nanodlp and Im having the same issue with the Wlan being disabled. Beta version works, but im having other issues with the screen orientation that might be related to the beta version?
Thanks oliveenchine, I'll give those a shot.
I did try to change the setting in nanodlp to 1440x2560 but it made no difference. I could change those numbers and nothing would change on the LCD. Perhaps its because im using NanoDLP.Beta? I have a Rpi3 and im using the built in Wifi. For some reason, when I use the regular NanoDLP it disables the Wifi and I cant connect to it. The Beta fixed that, but maybe its causing other problems?
Im having a problem where the image is not properly oriented. It needs to be rotated by 90 degrees, I cant seem to do this without screwing up the RPi. Ive tried reorienting the values (1440 x 2560) and the display_rotate=3 line in the config.txt but that just causes the Pi not to boot.
Did anyone ge this working with this setup?
Pages: 1