This graph image could be recreated using vector graphics as an SVG file. This has several advantages; see Commons:Media for cleanup for more information. If an SVG form of this image is available, please upload it and afterwards replace this template with {{vector version available|new image name}}.
This is an example of a two-dimensional FEM (finite element method) mesh for a cylindrically shaped magnetic shield. The mesh is created by an analyst prior to solution by the FEM software. In this case "two dimensional" means that the picture shows a flat cross section of an assembly that extends to a large distance at right-angles to the paper (Cartesian coordinates). The rectangle outlined at the right of the picture has been designated the conducting component, which carries the electric current that creates the magnetic field. The cylindrical part has been designated to be a material of high magnetic permeability (for example iron). The gray areas have been designated air. The mesh is divided into smaller triangles inside the cylinder, which is an area where the lines of magnetic flux will be more concentrated. See also Image:FEM_example_of_2D_solution.png.
Date
06/07/2007
Source
Self-made using Infolytica Corporation's MagNet Software.
I, Zureks, the copyright holder of this work, hereby publishes it under the following licenses:
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts. A copy of the license is included in the section entitled GNU Free Documentation License.http://www.gnu.org/copyleft/fdl.htmlGFDLGNU Free Documentation Licensetruetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
share alike – If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.
This licensing tag was added to this file as part of the GFDL licensing update.http://creativecommons.org/licenses/by-sa/3.0/CC-BY-SA-3.0Creative Commons Attribution-Share Alike 3.0truetrue
to share – to copy, distribute and transmit the work
to remix – to adapt the work
Under the following conditions:
attribution – You must attribute the work in the manner specified by the author or licensor (but not in any way that suggests that they endorse you or your use of the work).
share alike – If you alter, transform, or build upon this work, you may distribute the resulting work only under the same or similar license to this one.