Dagu Mini Driver Issue

If you need technical help with anything you've bought from Dawn Robotics, please post here.

Re: Dagu Mini Driver Issue

Postby Alan » Wed Oct 07, 2015 5:52 pm

Hi there,

Sorry for the delayed reply on this. I can't think of a good reason why this wouldn't work but have a list of things to try. If it doesn't work after this then we'll replace the hardware

  • If you attach the motors to the battery directly, do they turn?
  • Do you have any kind of bench top power supply that you could use to power the mini driver instead of the batteries to see if that helps?
  • Does the blink sketch work on the mini driver?

Apologies that you're seeing this problem.

Regards

Alan
Alan
Site Admin
 
Posts: 311
Joined: Fri Jun 14, 2013 10:09 am

Re: Dagu Mini Driver Issue

Postby 3dsource » Wed Oct 07, 2015 7:18 pm

Thanks for the reply. I tried the hooking the battery directly to the motor and it runs very fast.

I don't have a variable power supply but I have a couple of wall adapters ranging from 5 to 16 volts with various amp levels. Whats the max/min supply voltage of the board?

The blink sketch works and the blue light happily blinks.

I'm sorry for the trouble I am trying everything I can think of.
3dsource
 
Posts: 9
Joined: Fri Sep 25, 2015 8:21 pm

Previous

Return to Technical Support

Who is online

Users browsing this forum: Yahoo [Bot] and 0 guests