Welcome to OpenBuilds Community

Signup today and join in on the fun!

Sign Up

OTHER BUILDS/PROJECTS

Ultimo

May 6, 2014
Category
Other Builds
Build Progress
Build in Progress...

Ultimo is the ultimate multi tool for the person who's serious about prototyping new ideas. A Delta Robot frame supports 3d printing up to 450mm in diameter, a powerful CNC Mill, and 50 amp plasma cutter for processing steel plate. And that's just a start.....wait till you see some of the other attachments we are currently working on incorporating.

Software speed control of a brushless dc (Bldc) motor from Mach3.

Jun 14, 2014
Category
Other Builds
Build Progress
Build in Progress...

Although this build is typically Mach3 related there is no reason it cannot be adapted for use with any machine control software which provides a PWM spindle control output. As an addition, an option has now been added which will enable the interface to manually control outrunner speed without the need for a PWM signal.

Embroidery machine with XY belt and pinion drive.

Apr 22, 2014
Category
Other Builds
Build Progress
Build in Progress...

A simple Embroidery machine using an XY belt and pinion drive to drive a hoop under a standard sewing machine. Needle timing, machine power and stepper control are all provided by a PIC processor. A tablet provides the higher level formatting required for communicating with the PIC chip.

V-Slot Belt Driven Linear Actuator Build

May 31, 2014
Category
Other Builds

Quick and Simple V-Slot Gantry System. This example build shows how easy it is to make a linear actuator using a few OpenBuilds Parts. You can mount this system an many ways so be sure to download the example models.

CNC xPRO Driver

May 30, 2014
Category
OTHER BUILDS/PROJECTS
Build Progress
Build Complete!

Spark Concepts CNC xPRO Driver. A new GRBL compatible, all-in-one stepper driver board with 4 motor controllers for XYZ + 1 clone (or rotary!). Capable of powering your next build with an ATX PSU (or 12V 2 wire supply), and ready for wireless printing. Compatible with Arduino (wireless robots anyone?)

V-Slot Belt & Pinion Example Build

Mar 31, 2014
Category
Other Builds

The OpenBuilds team has redefined the belt and pinion concept. By using standard OpenBuild components were able to improve on this system in ways that will save on cost and enhance its engineering capabilities.

X -Y Stage Hidden Acme Rod Example

May 15, 2014
Category
Other Builds

An X-Y Stage created from two self contained acme screw linear actuators. This build was published as an example of how many of the OpenBuilds Parts can be used.

PnP 4 axis small/fast machine

Jan 22, 2014
Category
Other Builds
Build Progress
Build in Progress...

You need some mechanical and electronic experience. This is NOT a novice undertaking! a familiarity with linux a plus (but not necessary). Basic woodworking and metal fabrication a big plus as well.

Loading...
Loading Build images...
© XenZine Articles from Pick a Tutor