Separate names with a comma.
Signup today and join in on the fun!
Nice "XO" endplate he's got there :thumbsup: [IMG]
3.3mm deflection of the 3mm steel is 3 times the 1.1mm of 6mm aluminum. To match the 1.1mm deflection, you'd need 4.26 mm (0.168") steel which is...
If you're referencing zatopa, it appears they have had a shipping calc error which they have been working on. Contact them for a real price....
As a suggested revision, consider mounting another long piece of 2060 laid flat along the top of the current rail (creating a T-section) and using...
Any material is probably fine, the main goal is just to get it wedged into something with a wider spread to stabilize it. Notice how Mark has the...
Consider cutting a V-shaped notch in a couple blocks of wood and wedging them behind it. Cinch it down into the notch and that will give you a good...
Have you looked at https://sdp-si.com/eStore/CoverPg/Drive_Components.htm? They have a pretty wide range of sizes.
If the spindle is bucking in any, the bit will bounce rather than bite. You shouldn't be having to push anywhere near as hard as you are. Maybe...
"This video is private." --- Unlocking the video would be helpful.
Does the belt fit easily between the sides of the V-track? In the photos, it looks to be too wide. I have to agree with the others suggesting...
Were you looking for 6x16? http://www.avidrc.com/product/1/bearings/43/6x16x5-Rubber-696A-2RS-bearings.html
Nick: If you're in a hurry to get some rail, http://store.makerstoolworks.com/t-slot-extrusions-accessories/ has 20, 60, and 80mm sections in 1500mm...
The website appears to be working fine. For some reason however the link you provided doesn't click through with the ".uk" at the end so it goes...
Using smooth rods and V-wheels, you wouldn't even need clamps. Just slide the wheels into place like beads on an abacus and drop in the roll. On...
What bit did you use for this? Thanx.
Ditto in 7.
Umm... M5x0.8 taps can be had for as little as $1.99. Not great quality at that price but they will still save you about 14 minutes per hole.
I keep seeing the terms "strength" and "strong enough" appearing repeatedly as one of the main focuses but the issue here is not strength but...
Have you considered a compound table for your drill press like the Proxxon 27100? They are a bit small but when properly adjusted you should be able...
Yeah, I agree but I kinda have to draw the line where I could zap the snot out of myself. This is a cool project but it is best left to those who...
