OSH Park
Profile for AK6DN
Shared projects
RX02 Emulator Shield v4rev2 (2N7000-based version)
by
AK6DN.
4
layer board of
3.91x2.11
inches
(99.24x53.49
mm).
Shared on
October 19th, 2016 05:27.
RX02 Emulator Arduino Mega Shield v4rev2
Documentation: https://drive.google.com/open?id=0B7Csc-dWWfTYR3plTmtWd2VtWlU
Software: https://github.com/AK6DN/rx02_emulator
RX02 Emulator Shield v3rev1 (DS8641-based version)
by
AK6DN.
4
layer board of
3.91x2.11
inches
(99.24x53.49
mm).
Shared on
October 15th, 2016 22:34.
RX02 Emulator Arduino Mega2560 Shield v3rev1
Documentation: https://drive.google.com/open?id=0B7Csc-dWWfTYR3plTmtWd2VtWlU
Software: https://github.com/AK6DN/rx02_emulator
FP11A_2x10P_jumper
by
AK6DN.
2
layer board of
1.31x1.51
inches
(33.20x38.25
mm).
Shared on
September 26th, 2016 08:52.
DEC PDP-11/34A FP11-A 2x10P Jumper
FP11A_1x40P_jumper
by
AK6DN.
2
layer board of
0.81x2.31
inches
(20.47x58.57
mm).
Shared on
September 26th, 2016 08:52.
DEC PDP-11/34A FP11-A 1x40P Jumper
BERG40toDB9x
by
AK6DN.
2
layer board of
1.51x2.31
inches
(38.25x58.57
mm).
Shared on
May 4th, 2015 05:10.
Berg40 to DE9x adapter for DEC boards
This is an adapter board for DEC serial boards (DL11 series, KL8 series) that use the 40pin BERG (IDE) 2x20p cable connector for the serial port. It routes the serial signals from the flat cable connector to various pins on the DB9 (M or F) connector thru a set of 100mil jumper header blocks. Flexibility for using either a male or female DB9 connector is provided by using different jumper block positions.
J2 is a standard shrouded 40p male connector.
J1 is either a DB9 female or male connector, as desired.
P1-P4 are a set of header pins for jumpers.
Design files are accessible at this link
These are DipTrace schematic and layout data files; acrobat PDF of schematic and board are provided, as well as full layout gerber and drill files.