OSH Park
Profile for BrianEstrada
- You need to sign in or sign up before continuing.
Shared projects
ESP-8266-Relay-Board
by
BrianEstrada.
2
layer board of
1.08x2.63
inches
(27.31x66.68
mm).
Shared on
November 28th, 2015 18:09.
ESP Controlled Relay Board
ESP8266_TEMP_SENSOR
by
BrianEstrada.
2
layer board of
1.62x1.62
inches
(41.05x41.05
mm).
Shared on
November 28th, 2015 18:09.
3D Printer Wifi Aux Board
by
BrianEstrada.
2
layer board of
0.92x1.57
inches
(23.27x39.80
mm).
Shared on
November 21st, 2015 23:55.
Untested 1.0 Rev
Add WiFi capability to your 3D printing using one of the AUX ports, I’m currently going to test this using a Rambo Mini, I left the header routed and added jump points instead so you can use it on whatever board you’d like, it’s not ideal but there are so many different AUX configuration that theres not really a one size fits all type of board.
Parts
| Part Name | Quantity | Cost |
|---|---|---|
| ESP-12F | 1 | $2.50 |
| AMS1117-3.3v | 1 | $0.10 |
| 10uF Tantalum 1206 | 1 | $0.06 |
| 22uF Tantalum 1206 | 1 | $0.06 |
| 10k Resistor SMD 805 | 4 | $0.04 |
| 6mm Tactile Switch | 2 | $0.16 |
| 5x2 Female Connector | 1 | $0.01 |
| Osh Park Board | 1 | $2.33 |
| Total | $5.26 |