OSH Park
Profile for PhilD13
Shared projects
Icetube Clock - Transistor - Rev C
by
PhilD13.
2
layer board of
4.50x1.08
inches
(114.40x27.36
mm).
Shared on
February 6th, 2015 20:12.
A version of the Adafruit Icetube clock main board that will accept either a ZVP2110A FET (use a jumper wire for R6) or a PN2907 transistor for Q3 and use 470 ohm (min value) - 1K ohm (max value) for resistor R6. Suggest using firmware found here for the clock. https://github.com/johngarchie/xmas-icetube/
Icetube Clock Tube Board
by
PhilD13.
2
layer board of
1.13x1.07
inches
(28.75x27.28
mm).
Shared on
October 25th, 2014 11:54.
Replacement Tube board for the Icetube Clock based on the Adafruit board.
IceTube-RevB-MainBoard
by
PhilD13.
2
layer board of
4.50x1.06
inches
(114.35x26.87
mm).
Shared on
October 25th, 2014 11:46.
Main IceTube clock board Clone of the Adafruit main board with a few minor adjustments