Shared projects

[untested] A15DD-SO8 v017

by Red.

2 layer board of 0.59x0.59 inches (15.04x15.04 mm).
Shared on November 1st, 2014 20:52.

  • Direct voltage divider, NOT fed through D1.
  • R1/R2/D1 are all OK, it’s just OSH Park’s render. Here is the bottom copper layer, no shorts:

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

[outdated] Untested - 17mm A17DD-SO8 v020

by Red.

2 layer board of 0.67x0.67 inches (17.02x17.02 mm).
Shared on October 17th, 2014 02:14.

http://budgetlightforum.com/node/35507

Adopted version numbering from parent project.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

[outdated] Firmware Developers Only - 17mm DD+7135 v020

by Red.

2 layer board of 0.67x0.67 inches (17.02x17.02 mm).
Shared on October 17th, 2014 01:36.

https://oshpark.com/shared_projects/pcTBBHOv

This board DOES NOT HAVE A FIRMWARE AVAILABLE. EG this board is unusable right now unless you are a programmer.

This board is untested. Silkscreen markings SHOULD be correct.

This board requires a Power-SO8 footprint N-Channel FET such as PSMN3R0-30YLDX. Something like AO4468 should also work if you have that laying around.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

[OUTDATED] Untested - 17mm A17DD-SO8 v002

by Red.

2 layer board of 0.67x0.67 inches (17.02x17.02 mm).
Shared on October 13th, 2014 03:02.

http://budgetlightforum.com/node/35507

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

[OUTDATED] Firmware Developers Only - 17mm DD+7135 v012

by Red.

2 layer board of 0.67x0.67 inches (17.02x17.02 mm).
Shared on October 13th, 2014 02:14.

If you can’t figure out the component placements on a completely unlabeled board, this is not for you. This board does not have a firmware available. This board is untested. Any silkscreen markings are arbitrary and have no meaning.

This board requires a Power-SO8 footprint N-Channel FET such as PSMN3R0-30YLDX. Something like AO4468 should also work if you have that laying around.

This board DOES have the [June/July 2014] anti-boost fix incorporated which should allow us to run the FET without any resistors.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project