OSH Park
Profile for Telanoc
- You need to sign in or sign up before continuing.
Shared projects
Dual Linear Supply
by
Telanoc.
2
layer board of
1.68x0.89
inches
(42.55x22.56
mm).
Shared on
September 20th, 2016 02:26.
Just a small dual linear power supply using LM78Lxx and 79Lxx chips. Very flexible… just use a center tapped transformer with enough voltage for your regulators, and appropriate capacitors.
ESP-01 NeoPixel interface
by
Telanoc.
2
layer board of
1.00x0.84
inches
(25.40x21.26
mm).
Shared on
September 20th, 2016 02:21.
Interface board to easily use an ESP-01 with RGB LED strips. I use this for a TIX clock. Board (and LEDs) powered with 5v DC. A 3.3v regulator powers the ESP-01. I also use a mosfet level converter for the data line, though I don’t know if it’s absolutely necessary… better safe than sorry though.
U1 - TPS732xx (whichever one is 3.3v)
Q1 - BSS138 mosfet
R1,2,4 - 10k
R3 - 300-500 (not critical)
C1 - 10uf
C2 - 0.1uf (I've used 1uf for both and it works)
LED Light Bar
by
Telanoc.
2
layer board of
4.00x0.25
inches
(101.60x6.40
mm).
Shared on
September 20th, 2016 02:21.
Light bar for under my desk cupboards. I have a bunch of super bright white LEDs that I need to use up and these will help throw light around the desk.
With a 12v supply and 47 ohms for the resistor, I was reading 8ma current draw, and the LEDs were pretty bright.
Apparently there’s a bug with the board outline code so it displays funny on the web site - the 9 boards I ordered all came out fine.
Mega2560_SRAM
by
Telanoc.
4
layer board of
2.00x1.00
inches
(50.80x25.45
mm).
Shared on
November 19th, 2015 01:10.
512k Static Ram expansion for Arduino Mega2560. This is a slight modification and re-layout of the board by Andy Brown (http://andybrown.me.uk)
Tested and working. See Andy’s site for the software and how to use it.
Board and schematic at: https://github.com/telanoc/mega2560_xmem
Small TIX Display
by
Telanoc.
2
layer board of
2.86x1.43
inches
(72.69x36.20
mm).
Shared on
November 14th, 2015 04:50.
A display board for a small TIX clock using SMD parts. This goes with the TIX controller also by me.
Eagle files and software at https://github.com/telanoc/esp_tix_clock