Shared projects

CC-Dbg-TC2030-Adapter v1.0 Rev-B

by drmkroll.
Top
Bottom

2 layer board of 1.19x1.00 inches (30.15x25.40 mm).
Shared on May 18th, 2014 14:56.

This is the CC-Debugger TagConnect 2030 Adapter I created to flash my BLEbee’s firmware. I described the use of the adapter in the following blogpost: http://www.mkroll.mobi/?p=1639

The Eagle source files are available from the github repository at: https://github.com/michaelkroll/Hardware-Tools

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

DKBLE11x OTA AddOn Module

by drmkroll.
Top
Bottom

2 layer board of 1.05x0.90 inches (26.64x22.86 mm).
Shared on April 6th, 2014 11:26.

This is the DKBLE112/113 OTA AddOn Module described in blogpost: http://www.mkroll.mobi/?p=1501

The bill of materials consists of a few parts only:

  • 2 x 10 kOhm resistor (0603) package
  • 1 x 1uF capacitor (0603) package
  • 1 x W25X20CL SPI flash
  • 2 x 8pin Arduino Headers.

The Eagle source files and the part numbers to order are available from the github repository at: https://github.com/michaelkroll/Hardware-Tools

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project