OSH Park
Profile for jnavarro
- You need to sign in or sign up before continuing.
Shared projects
Fish Food Lure for MinnowBoard
by
jnavarro.
2
layer board of
2.05x1.86
inches
(52.17x47.17
mm).
Shared on
August 19th, 2016 04:01.
Fish Food Lure for MinnowBoard MAX / Turbot compatible boards. Fish Food Lure exposes the LSE pins onto a breadboard by using a ribbon cable. https://github.com/MinnowBoard/lure-fish-food
PSoC1 Dev Board
by
jnavarro.
2
layer board of
0.54x1.70
inches
(13.67x43.15
mm).
Shared on
June 30th, 2016 04:48.
Custom PSoC1(CY8C21223-24SXI) Dev Board
Place it directly onto a breadboard, program it with the MiniProg3 from Cypress Semiconductor.
https://github.com/jnavarro7/PSoC1_Dev_Board
chip_sim808_fiducial.zip
by
jnavarro.
2
layer board of
1.61x2.64
inches
(40.84x67.06
mm).
Shared on
June 16th, 2016 03:56.
Pico de gallo C.H.I.P. Dip Rev 0.9
by
jnavarro.
2
layer board of
3.17x2.57
inches
(80.54x65.15
mm).
Shared on
May 28th, 2016 12:57.
Relay board for the C.H.I.P. computer
https://github.com/jnavarro7/Pico_de_gallo_C.H.I.P._Dip
UNTESTED
C.H.I.P. Prototype Dip Rev 1.0b
by
jnavarro.
2
layer board of
1.64x2.07
inches
(41.66x52.65
mm).
Shared on
April 27th, 2016 06:16.
Prototype Dip for the C.H.I.P. single board computer
Rev 1.0b
Created using DipTrace 3.0
Exposes C.H.I.P. GPIOs P0 to P7, GND, Power(5V, 3.3V), UART(Tx & Rx), I2C(SDA & SCK), Interrupt and FEL pins. Has 2 mounting holes that fits M2 screws.
Released under Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0)
https://github.com/jnavarro7/C.H.I.P._Prototype_Dip
UNTESTED