OSH Park
Profile for miker
Shared projects
5V_0.95inch_SPI_Oled_Rev2.1
by
miker.
2
layer board of
1.01x1.05
inches
(25.68x26.72
mm).
Shared on
October 25th, 2016 11:43.
Schematic and Bill of materials at: https://github.com/mike-rankin/3.3v-5v_0.95inch_SPI_Color_Oled
Grab the shared PCB from OSHPark at https://www.oshpark.com/shared_projects/Vlc5MLaO
Reach me at @mikerankin for any questions or comments
ESP8266-12E_0.95_Color_Oled_Rev1
by
miker.
4
layer board of
1.87x0.99
inches
(47.60x25.04
mm).
Shared on
September 27th, 2016 14:46.
Schematic, Bill of Materials and Test Code at: https://github.com/mike-rankin/ESP8266-E12_Color_Oled
Assembly instructions -order the components on the parts list, follow the parts placement map and use the test sketches located here: https://0miker0.wordpress.com/esp8266-color-oled/ hand stuff the components, solder on the oled display but do not tape it down yet.
-connect the board to the Arduino IDE, pick the Adafruit Hazzah as the board, choose the right com port and load in one of the example sketches that I’ve modified for this hardware.
https://youtu.be/wIoibrByEOk
SAMD21G18A_Sensor_Board_Rev1
by
miker.
4
layer board of
0.81x1.55
inches
(20.65x39.27
mm).
Shared on
September 27th, 2016 11:38.
ARM based version of the Sensor Board. For a schematic, BOM and Altium layout see https://github.com/mike-rankin/SAMD21G18A_Sensor_Board A video of it in action is at https://youtu.be/tMW9Yn2fMDE
BeagleBone Black Oled Rev1.0
by
miker.
2
layer board of
1.12x0.88
inches
(28.35x22.40
mm).
Shared on
August 26th, 2016 11:50.
Schematic and BOM at: https://github.com/mike-rankin/BeagleBoneBlack_3.3V_SPI_Oled
ESP8266 Oled Board Rev3
by
miker.
2
layer board of
1.01x0.88
inches
(25.68x22.40
mm).
Shared on
October 7th, 2015 19:22.