Shared projects

32Mbit Flash to 42 pin 8-Bit Adaptor

by mikey.
Top
Bottom

2 layer board of 2.13x0.77 inches (53.97x19.63 mm).
Shared on July 25th, 2016 16:04.

29F032 or other 32Mbit TSOP to DIP42 8bit adaptor. Designed for use in repairing NEO-GEO cartridge V-roms that require 32Mbit (4MB) rom replacements. Jumper settings on the board allow you to select which mode you are using the adaptor, programming or reading (place jumper between MODE and PRG to program, and MODE and RD to read).

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project

32Mbit 42pin Programming Adaptor

by mikey.
Top
Bottom

2 layer board of 2.35x1.04 inches (59.56x26.42 mm).
Shared on July 25th, 2016 16:04.

Allows for programming of 29F032 or other 32Mbit Flash once soldered to the DIP42 adaptor board. Supports the GQ-4X programmer pinout (no need for the extended address headers) as well as regular DIP32 pinouts with address headers via solder pads for pins A19-A21.

Order board. Download. Permalink. Embed order link.

Copy this HTML into your page to embed a link to order this shared project