OSH Park
Profile for neuralfirings
- You need to sign in or sign up before continuing.
Shared projects
AYAB Knitting
by
neuralfirings.
2
layer board of
2.76x2.16
inches
(70.18x54.91
mm).
Shared on
November 29th, 2015 17:06.
from here: https://bitbucket.org/chris007de/ayab-apparat
ayab-apparat / hardware / 10_ayab-arduino / through_hole /
Edison: Hello World
by
neuralfirings.
2
layer board of
1.19x1.40
inches
(30.23x35.66
mm).
Shared on
July 18th, 2015 08:05.
Blink blink.
Simple LED connected to PIN13 of the Intel Edison board.
Raspberry Pi to Stepper Motor Connector
by
neuralfirings.
2
layer board of
1.49x1.70
inches
(37.72x43.26
mm).
Shared on
June 26th, 2015 06:39.
A PCB for connecting a Raspberry Pi to a Stepper Motor. You’ll need to solder in a Pi Header, L293D motor controller, and some header pins to plug in the motor. It basically replaces the breadboard part of Adafruit’s Raspberry Pi Stepper Motor Tutorial.
I call it Bad Wolf because I’m using it for an Internet Dog Treat dispenser.
More info on the Bad Wolf project here: http://blog.nyl.io/dog-treat-dispenser-v3/